Intec K81018 Installation Guide download pdf

Operation and Safety Guide

Model # K81018

____________________________________________________________________________________________________________

Vendor Website: www.inteccorp.com Support Phone No. 800-666-1611

Tool Application: See operational video at

http://www.inteccorp.com/cyclone/

Tool Operation:

Step

Action

Unload the machine using safe lifting techniques.

Position the machine in a dry, hazard free

environment to allow for suitable material feed

and access to electrical power.

Note: At cold temperatures below 35 F., oil

thickens and will cause machine to start up hard.

To prevent hard startup, leave machine in warm

area overnight (8 hours).

Secure 100 feet of blowing hose to machine

outlet with a hose clamp.

Remove slide gate locking pin, open the slide

gate to the last hole position for attic blow & re-

insert locking pin. (See owner’s manual for wall

applications.)

Ensure all controls are in the “off” position.

Use a 12-3 extension cord no longer than 50 feet

to connect the machine’s power cord to a

dedicated circuit – 115V 20amp or 15amp.

To power machine, first turn the blower switch to

the “on” position, then the agitator switch to the

“on” position.

Now use the remote switches to first turn the

blower, then agitator “on”. When turning

machine “off”, turn agitator “off” first, then blower.

Open a bag of insulation and hand feed the

insulation material into the hopper. Do not let

the plastic bag or other foreign objects fall into

the hopper; do not force feed insulation..

At completion, use the remote or panel switch to

turn machine off.

Remove any insulation still in the system.

Make sure you return all parts and accessories

when bringing machine, hose, and power cord (if

supplied) to the rental center from which it was

obtained.

SAFETY TOPICS:

To avoid personal injury, do not attempt to operate this

equipment until you thoroughly read and completely understand

the operator’s manual. Please visit

http://www.inteccorp.com/cyclone/

for additional information.

SAFETY CHECKLIST:

1) Read all the instructions before using the insulation blower.

2) To reduce the risk of injury, close supervision is necessary

when an insulation blower is used near children.

3) Do not contact moving parts.

4) Only use attachments recommended or sold by the

manufacturer.

5) Use of Extension and Power Cord:

a) This product requires the use of a power cord. In addition

to the supplied power cord, care should be exercised in

the selection and use of an extension cord.

b) The extension cord shall be a grounded 3-wire cord.

c) The extension cord should be arranged so that it will not

drape over the countertop or tabletop where it can be

tripped over, snagged, or pulled on unintentionally

(especially by children).

d) An outdoor rated extension cord should be used with this

machine. An outdoor- use extension cord is marked with

suffix letter “W” and with a tag stating “Suitable for Use

with Outdoor Appliances.”

e) The marked electrical rating of the extension cord shall

be rated for at least 15 amps.

f) To unplug or disconnect: Put the blower and agitator

control panel and remote buttons in the stop position

before removing plug from outlet.

g) Do not unplug by pulling on the power cord. To unplug,

grasp the male and female plugs and pull apart.

h) Unplug from outlet when not in use and before servicing

or cleaning.

i) Do not operate any insulation blower with a damaged

cord or plug, or after the machine malfunctions or is

dropped or damaged in any manner.

6) In the case of a non-operable or malfunctioning blower, return

the insulation blower to the nearest authorized service facility

for examination, repair, or electrical or mechanical adjustment.

7) Store insulation blower indoors when not in use. Keep out of

the reach of children

8) Never operate this equipment if the operator or the machine is

standing in water, snow or rain. Do not clean this insulation

blower with water spray or the like.

9) Connect to a properly grounded outlet only.

10) Wear long sleeve shirt, gloves, a hat, safety glasses or

goggles, and a nose & mouth dust mask.

WARNING:

1) Never reach into the hopper when system is operating.

2) Keep all foreign materials out of hopper.

3) Stop all motors and disconnect power cord before attempting

to remove a foreign object or jam.

4) Never point insulation hose in the direction of people or pets.

Operation and Safety Guide 1

Summary of Contents

Page 1 - Operation and Safety Guide

Operation and Safety Guide Model # K81018 ___________________________________________________________________________________________

Comments to this Manuals

No comments

Intec K81018 Installation Guide

Browse online or download Installation Guide for Air blowers/dryers Intec K81018. Intec K81018 Installation Guide User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Air blowers/dryers Intec K81018